Technical Specifications
All of the technical specifications you need to consider using MetalWrap Series as part of your next metal, brick or terra cotta job are located in CENTRIA's MetalWrap Series Specifications Guide.
MetalWrap Series General Specifications
For use with Metal
- Width – 36 in. (914mm) / Length – 12 ft. (4mm) or 20 ft. (6m) standard lengths
- Face and liner – 29GA, AZ-50 Galvalume Plus/Primed Liner*
- Foam insulation – Minimum 2.4 PCF Urethane modified polyisocyanurate foam
- Vertical or horizontal installation for CENTRIA Concept Series®, IW Series, Exposed Fastener, and FormaBond® exterior cladding panels
For use with Brick
- Width – 32 in. (813mm) or 36 in. (914mm) / Length — 12 ft. (4m) or 20 ft. (6m) standard lengths
- Face and liner – 29GA Galvalume with Primer/AZ-50GA Galvalume Plus Liner*
- Foam insulation – Minimum 2.4 PCF polyisocyanurate foam
- Vertical or horizontal installation
For use with Terra Cotta
- Width – 32 in. (813mm) / 12 ft. (4m) or 20 ft. (6m) standard lengths
- Face and liner – 29GA Galvalume with Primer/AZ-50GA Galvalume Plus Liner*
- Foam insulation – Minimum 2.4 PCF polyisocyanurate foam
- Vertical or horizontal installation
*26GA available for fire rated walls
The New MetalWrap Series Classifications
For more technical information about MetalWrap Series, register for our e-CENTRIA portal today.